CNNislands

Netgear N300 Extender Not Connecting to Router? Let’s Fix!

0 6

- Advertisement -

Having hard time to connect your Netgear N300 extender to the router? Need not to worry! You aren’t the only one who is stuck with the issue. 90% of users across the globe are struggling with the same issue. But, the good news is that – we have a rescue plan for you. In this post, we will provide you fixes to get rid of the issue in minutes. So, let’s get the ball rolling! To check out more about chiffrephileconsulting click here.

Reasons Why N300 Not Connecting to Router

There can be several reasons that might be preventing your N300 from connecting to the router. We’ve mentioned some of the common reasons below. Keep scrolling down!

  • Distance between your N300 and router is too much.
  • You haven’t connected your devices in a proper manner. Make sure that the Ethernet cable you have used is well-working. On the off chance if you have used a wireless source to connect your devices, ensure to connect to correct network.
  • The firmware of your N300 is outdated.
  • Impartial or incomplete Netgear N300 setup

Now that you have come to know the reasons why you are facing Netgear N300 extender not connecting to router issue, let’s make you familiar with the fixes to troubleshoot it. Continue reading!

Fixed: Netgear N300 Extender Not Connecting to Router

Power Cycle Your N300

Most of the times, users can’t connect their N300 to router because their extender gets overheated. So, if your extender is also overheated or you haven’t given the device a rest since too long, then it’s high time to power cycle or restart your N300. To power cycle your Netgear N300 extender, walk through the guidelines highlighted below:

  • First and foremost, disconnect your N300 device from currently connected devices.
  • Turn off your Netgear extender and wait for a few minutes.
  • Now, turn on your N300
  • Try to connect your extender to router and see whether this tip worked for you or not.

Reduce the Distance Between Your Netgear N300 Extender and Router

In the event that the distance between your Netgear extender and router is too much, then also you may come across with the issue. To fix it, make sure that your N300 and router are placed in close proximity. But, not too close! If your devices are placed too closer – their WiFi signals can clash. Your devices can be placed within range of 20 feet. But, do not exceed the limit of 50 feet.

- Advertisement -

Once you’re done, try to access mywifiext.local on an iPad or iPhone to see if your N300 is now connected to the router after reducing the distance.

Note: For Android or Windows computer users, use www.mywifiext.net.

Update the Firmware of Your Netgear Extender

An outdated firmware on your Netgear N300 extender is one of the biggest reasons behind the issue. Therefore, make sure that your extender’s firmware version is up-to-date. Wondering how to update N300 firmware? If so, follow the instructions highlighted below:

  • Connect your extender to the router using an Ethernet cable.
  • Launch a web browser on a WiFi-enabled device that is connected to Netgear_ext SSID.
  • Access the Netgear Genie setup wizard using mywifiext.local or www.mywifiext.net default web address.
  • Follow the on-screen instructions.

After performing Netgear firmware update process check whether your N300 is connecting to the router or not. In case not, then don’t stop reading. The last and effective method to fix the issue is to reset your Netgear N300 extender back to factory default values.

How to Factory Reset Netgear Extender?

Here are the steps you need to follow in order to reset your Netgear extender to the factory default settings:

  • Make sure that your Netgear extender is powered on.
  • Next, locate the reset hole on your N300. Don’t forget to disconnect your Netgear devices from your router and other connected devices.
  • Find the reset hole on your N300.
  • Press it gently using a thin and pointed object.
  • Hold and release the Netgear extender reset hole.

Endnote

That was all about our post to fix Netgear N300 extender not connecting to router issue. If the issue still persists, drop your queries into the comments section.

- Advertisement -

- Advertisement -

Leave A Reply

Your email address will not be published.