CNNislands

5 More Common Mistakes in Security and safety Camera System Design

0 7

- Advertisement -

1 . Buying cheap equipment

You can find plenty of poorly made devices on the CCTV market right now. We know this because most of us reject 90% of the supplier samples that come across our test bench. Choose the Best best spy pen camera.

If you buy the cheaper equipment on the market you are apt to have these kinds of problems: 

  • Devices that don’t work out of the pack
  • Cameras that work for a while in that case stop
  • Cheap brackets in addition to connections that won’t hold up
  • Doors cameras that leak
  • Infrared that is ineffective
  • Poor impression quality
  • Missing features with your DVR
  • DVR software that is buggy and incomplete

Several big box stores are now presenting “complete” CCTV setups. Nevertheless, these systems are usually of low quality and are not meant to meet your requirements. The other problem with this kind of pre-packaged system is that they will have proprietary connections, so you cannot mix and match components from other companies. Furthermore, if you have a problem or perhaps question the product, they could be recycled, likely to have the expertise to help you.

Solution: Buy from a reputable corporation that specializes in CCTV. Look for critiques and references that show that the products are of good quality. Often the sales staff should know all their product and help you style and design a system that suits you. Look for good support, assurance, and return policy. Be sure that the cameras and Network video recorder all have BNC (Bayonet Neill-Concelman) type connections for any video.

2 . Using just one PTZ camera to cover too big an area

PTZ (pan suggestions tilt/zoom) cams are great because they allow you to move the camera up-and-down and side-to-side via network and adapt the focus (zoom) in and out. Consequently, theoretically, you can cover many areas with one PTZ camera.

However, unless a human often examines the PTZ camera, it will be focused on one place at a time, just as any other camera. We often find incidents if she is not recorded because it happened beyond your current view of the PTZ even though it was within the PTZs viewing range.

Solution: If you do not have a human actively tracking and adjusting the PTZ, do not use them to cover an extensive area. Instead, use numerous cameras to protect the site successfully. The good news is that you can usually obtain several non-PTZ cameras for the cost of one PTZ.

3 . I do not have enough capacity to look at cameras remotely.

To look at your cameras remotely, you need to connect your DVR to a network and set it up to broadcast to the Internet. The trouble is that homeowners often do not have the net upload speed to support live viewing remotely. Businesses have no problem with this because business Internet service is usually faster.

Standard commercial Internet speeds are generally 12 Mbps (megabit for every second) download and a few Mbps upload. For household sites, it’s often closer to a few Mbps download and zero. 5 Mbps upload. Which 1/10 of the typical add speed than you are used to discovering on commercial sites.

- Advertisement -

Solution: If you want to view your cams remotely over the Internet or with your phone, make sure you arrange with the Internet Service Provider to get at least just one Mbps upload speed.

4 . Using an analog “wireless” video camera system

The name “wireless video camera system” is somewhat unreliable. Although you don’t need electrical wires to transmit the video, you will still need wires to power all components. So, cellular systems do not solve your cabling dilemmas.

There are two different types of wireless technologies: manual and digital. Because the administration regulates which frequencies manual wireless devices can be designed with and how strong the indicate can be, interference is significant. Other wireless appliances, including cell phones and microwave cookers, can cause the video to be unsteady, distorted, and noisy.

Manual wireless transmission is also deficient in any video data security encryption. Consequently, anyone with a receiver inside range utilizing the same frequency can easily view and record your current camera’s video.

Solution: Utilize a hard-wired analog security digicam system or a digital wi-fi camera system.

5 . DVR does not allow an adequate quantity of remote viewers

DVR applications will often limit the number of consumers that can remotely view the digicam system at one time. This can currently be a problem for schools, child care centers, and other businesses which can be marketing this capability together with their assets.

In addition, bandwidth needs to be considered in these scenarios as well. The more people you will have connected remotely, the more bandwidth will be used on your current network.

Solution: If enabling multiple people to view the video cameras remotely at one time is a critical need, then you must double-check for just about any limitations in the DVR software program. One trick to address the actual bandwidth issue is to set up your router to detach any users that are attached to the DVRs IP address for more than a particular number of minutes.

For example, if a person views the digital camera system remotely on their pc and then leaves the display screen open, the router will certainly automatically disconnect them right after 15 minutes (or whatever time frame is appropriate).

Read Also: Video Cameras – The Truth About Wireless Digital Cameras

- Advertisement -

- Advertisement -

Leave A Reply

Your email address will not be published.